ZyXEL Communications USG-100@USG-200 - V2.20 ED 2 - Edit System Log Settings

Chapter 51 Log and Report
ZyWALL USG 100/200 Series User’s Guide
885
The following table describes the labels in this screen.
51.3.2 Edit System Log Settings
The Log Settings Edit screen controls the detailed settings for each log in the
system log (which includes the e-mail profiles). Go to the Log Settings
Summary screen (see Section 51.3.1 on page 884), and click the system log Edit
icon.
Table 256 Configuration > Log & Report > Log Setting
LABEL DESCRIPTION
Edit Double-click an entry or select it and click Edit to open a screen where
you can modify the entry’s settings.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
# This field is a sequential value, and it is not associated with a specific
log.
Name This field displays the type of log setting entry (system log, logs stored
on a USB storage device connected to the ZyWALL, or one of the remote
servers).
Log Format This field displays the format of the log.
Internal - system log; you can view the log on the View Log tab.
VRPT/Syslog - ZyXEL’s Vantage Report, syslog-compatible format.
CEF/Syslog - Common Event Format, syslog-compatible format.
Summary This field is a summary of the settings for each log. Please see Section
51.3.2 on page 885 for more information.
Active Log
Summary
Click this button to open the Active Log Summary Edit screen.
Apply Click this button to save your changes (activate and deactivate logs) and
make them take effect.