Chapter 19 NAT
ZyWALL USG 100/200 Series User’s Guide
426
19.2.1 The NAT Add/Edit Screen
The NAT Add/Edit screen lets you create new NAT rules and edit existing ones.
To open this window, open the NAT summary screen. (See Section 19.2 on page
424.) Then, click on an Add icon or Edit icon to open the following screen.
Figure 319 Configuration > Network > NAT > Add
The following table describes the labels in this screen.
Table 109 Configuration > Network > NAT > Add
LABEL DESCRIPTION
Create new
Object
Use to configure any new settings objects that you need to use in this
screen.
Enable Rule Use this option to turn the NAT rule on or off.
Rule Name Type in the name of the NAT rule. The name is used to refer to the NAT
rule. You may use 1-31 alphanumeric characters, underscores(_), or
dashes (-), but the first character cannot be a number. This value is
case-sensitive.
To Next Page
Loading...
