Chapter 7 Tutorials
ZyWALL USG 100/200 Series User’s Guide
176
•Click OK.
Figure 140 Configuration > Network > NAT > Add
7.13.4 Set Up a WAN to DMZ Firewall Rule for SIP
The firewall blocks traffic from the WAN zone to the DMZ zone by default so you
need to create a firewall rule to allow the public to send SIP traffic to the IPPBX. If
a domain name is registered for IP address 1.1.1.2, users can use it to connect to
for making SIP calls.
To Next Page
Loading...
