Chapter 29 SSL User File Sharing
ZyWALL USG 100/200 Series User’s Guide
553
29.7 Uploading a File
Follow the steps below to upload a file to the file server.
1 Log into the remote user screen and click the File Sharing tab.
2 Specify the location and/or name of the file you want to upload. Or click Browse
to locate it.
3 Click Upload to send the file to the file server.
4 After the file is uploaded successfully, you should see the name of the file and a
message in the screen.
Figure 400 File Sharing: File Upload
Note: Uploading a file with the same name and file extension replaces the existing file
on the file server. No warning message is displayed.
To Next Page
Loading...
