Chapter 8 L2TP VPN Example
ZyWALL USG 100/200 Series User’s Guide
218
1 Click Start > Settings > Network and Dial-up connections > Make New
Connection. In the wizard welcome screen, click Next.
Figure 214 Start New Connection Wizard
2 Select Connect to a private network through the Internet and click Next.
Figure 215 New Connection Wizard: Network Connection Type
3 Enter the domain name or WAN IP address configured as the My Address in the
VPN gateway configuration that the ZyWALL is using for L2TP VPN. Click Next.
Figure 216 New Connection Wizard: Destination Address
172.16.1.2
To Next Page
Loading...
