Chapter 34 IDP
ZyWALL USG 100/200 Series User’s Guide
619
signatures by criteria such as name, ID, severity, attack type, vulnerable attack
platforms, service category, log options or actions.
Figure 435 Configuration > Anti-X > IDP > Profile: Query View
The following table describes the fields specific to this screen’s query view.
Table 167 Configuration > Anti-X > IDP > Profile: Query View
LABEL DESCRIPTION
Name This is the name of the profile that you created in the IDP > Profiles >
Group View screen.
Switch to group
view
Click this button to go to the IDP profile group view screen where IDP
signatures are grouped by service and you can configure activation, logs
and/or actions.
Query
Signatures
Select the criteria on which to perform the search.
Search all
custom
signatures
Select this check box to search for signatures you created or imported in
the Custom Signatures screen. You can search by name or ID. If the
name and ID fields are left blank, then all custom signatures are
displayed.
Name Type the name or part of the name of the signature(s) you want to find.
Signature
ID
Type the ID or part of the ID of the signature(s) you want to find.
To Next Page
Loading...
