ZyXEL Communications USG-100@USG-200 - V2.20 ED 2 - Page 73

Chapter 4 Installation Setup Wizard
ZyWALL USG 100/200 Series User’s Guide
73
Use the Registration > Service screen to update your service subscription
status.
Figure 35 Registration
• Select new myZyXEL.com account if you haven’t created an account at
myZyXEL.com, select this option and configure the following fields to create an
account and register your ZyWALL.
• Select existing myZyXEL.com account if you already have an account at
myZyXEL.com and enter your user name and password in the fields below to
register your ZyWALL.
•Enter a User Name for your myZyXEL.com account. Use from six to 20
alphanumeric characters (and the underscore). Spaces are not allowed. Click
Check to verify that it is available.
• Password: Use six to 20 alphanumeric characters (and the underscore).
Spaces are not allowed. Type it again in the Confirm Password field.
• E-Mail Address: Enter your e-mail address. Use up to 80 alphanumeric
characters (periods and the underscore are also allowed) without spaces.
• Country Code: Select your country from the drop-down box list.