ZyXEL Communications USG-100@USG-200 - V2.20 ED 2 - Page 731

Chapter 39 Device HA
ZyWALL USG 100/200 Series User’s Guide
731
2 Configure a corresponding disabled bridge interface on the backup ZyWALL. Then
set the bridge interface as a monitored interface, and activate device HA.
3 Enable the bridge interface on the master ZyWALL and then on the backup
ZyWALL.
4 Connect the ZyWALLs.
B
A
Br0 {ge4, ge5}
Br0 {ge4, ge5} Disabled
Disabled
B
A
Br0 {ge4, ge5}
Br0 {ge4, ge5}
B
A
Br0 {ge4, ge5}
Br0 {ge4, ge5}