Chapter 42 Services
ZyWALL USG 100/200 Series User’s Guide
761
To access this screen, log in to the Web Configurator, and click Configuration >
Object > Service > Service Group.
Figure 502 Configuration > Object > Service > Service Group
The following table describes the labels in this screen. See Section 42.3.1 on page
762 for more information as well.
Table 209 Configuration > Object > Service > Service Group
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to be able to modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The ZyWALL confirms
you want to remove it before doing so.
Object
References
Select an entry and click Object References to open a screen that
shows which settings use the entry. See Section 13.3.2 on page 312 for
an example.
# This field is a sequential value, and it is not associated with a specific
service group.
Name This field displays the name of each service group.
By default, the ZyWALL uses services starting with “Default_Allow_” in
the firewall rules to allow certain services to connect to the ZyWALL.
Description This field displays the description of each service group, if any.
To Next Page
Loading...
