Chapter 44 AAA Server
ZyWALL USG 100/200 Series User’s Guide
774
following screen. Use this screen to create a new AD or LDAP entry or edit an
existing one.
Figure 511 Configuration > Object > AAA Server > Active Directory (or LDAP) > Add
The following table describes the labels in this screen.
Table 215 Configuration > Object > AAA Server > Active Directory (or LDAP) > Add
LABEL DESCRIPTION
Name Enter a descriptive name (up to 63 alphanumerical characters) for
identification purposes.
Description Enter the description of each server, if any. You can use up to 60
printable ASCII characters.
Server Address Enter the address of the AD or LDAP server.
Backup Server
Address
If the AD or LDAP server has a backup server, enter its address here.
Port Specify the port number on the AD or LDAP server to which the ZyWALL
sends authentication requests. Enter a number between 1 and 65535.
This port number should be the same on all AD or LDAP server(s) in this
group.
To Next Page
Loading...
