Configuring the ISA Adapter
2-2
■ Configuring Multiple ISA Adapters for an ISA
Computer
■ Changing Software Option Settings
Performing the procedures described in the section “Auto
Installing a Single ISA Adapter for an ISA Computer and
a NetWare NOS” accomplishes the following:
■ Automatically configures the adapter
■ Installs all necessary NetWare DOS ODI client
software
■ Automatically logs onto the server and updates the
client software if your system administrator has
already configured a 3Install account on your server
■ Modifies the CONFIG.SYS and AUTOEXEC.BAT
files for NetWare users
Refer to the section “Changing Software Option Settings” if
any of the following situations apply to your configuration:
■ You have a boot PROM.
■ You are using a modem faster than 9600 baud.
■ You want to optimize driver performance for OS/2
®
or
Windows
™
.
■ You wish to change the type of network connector.
To Next Page
Loading...
Need help?
General
