Configuring the ISA Adapter for an EISA Computer 4-5
When the Configure Adapter dialog box appears, as
shown in Figure 4-4, select the <Modify> command
button.
Figure 4-4. Configuration Dialog Box
11. Select EISA with the arrow keys and press
[Enter].
This changes the I/O base address setting.
12. Save the new configuration setting to the adapter
by tabbing to <OK> and pressing [Enter].
13. Exit the program and remove the EtherDisk
diskette.
14. Insert the EISA configuration diskette provided
with your computer into drive A.
To Next Page
Loading...
