Configuring the ISA Adapter 2-7
6. Read the screen and press [Enter].
7. When the main menu screen shown in Figure 2-2
appears, select Auto Configure 3Com ISA Adapter
and press [Enter].
A message appears indicating successful
configuration. Configuration is now complete.
Proceed to Chapter 5, “Connecting to the Network.”
Configuring Multiple ISA Adapters
for an ISA Computer
The following procedures are necessary only if you have
physically installed more than one EtherLink III ISA
adapter in your computer.
NOTE: If this computer is an operating server, notify all
users of the server to save their work and log out from
the network. The Configuration and Diagnostic
Program disrupts the normal operation of servers and
workstations, so work that is not saved may be lost.
To Next Page
Loading...
Need help?
General
