Using the Configuration and Diagnostic Program
A-4
Choosing a Menu Item
Table A-2 lists the menu items in the Configuration and
Diagnostic Program. Each menu item is explained in the
help screens. Press [F1], tab to the <Index> command
button, and press [Enter] to see the list of help screens
included in the program.
Table A-2. Definition of Menu Items
Menu Menu Item Description
Quit Exit Exits the program.
Command Line Help Explains how to use the program
from the command line.
Driver Installation Help Explains where to access the
network drivers for the EtherLink III
adapters.
About Lists the program’s version.
Install Configure Adapter Manually configures the currently
selected adapter.
Test Run Tests Runs the diagnostic tests with the
chosen test configuration and view
the results.
Test Setup Determines which tests will be run by
the program.
Echo Server Sets up a computer as an echo server.
View Adapter Information Displays specific adapter
information.
Adapter Statistics Displays the network statistics
maintained by the adapter.
Select Select Adapter Selects an adapter and displays the
configuration and adapter-specific
information for the selected adapter.
To Next Page
Loading...
Need help?
General
