493D SYSTEMS, INC. PN:80-D27 Rev.B
3
Information area
• ATMOSPHERE
• Gas (mode of the gas supplied): REGUL (regulation around an oxygen target value), DIRECT (continuous injection of
gas at a constant rate), OFF (no gas injection),
• Status of the gas valve indicator : if green, the valve is opened,
• O2 value: current oxygen level value in PPM (particles per million) on the manufacturing chamber,
• O2 setpoint: oxygen level target value,
• Enclosure pressure: current pressure value on the manufacturing chamber,
• Enclosure temperature: current temperature value on the manufacturing chamber.
• LENS CLEANER
• Turbine: state of the lens cleaner blower (turbine). If green/white, the blower is operating/not operating,
• Setpoint: setpoint of the blower operating, in %,
• Differential pressure : [Outlet Pressure – Inlet Pressure] of the external lter.
• PART
• Clamping: status of the base plate clamp. If green/white, clamping is ON/OFF,
• Available powder: the height of the powder available in the feeding piston in mm,
• Zero sintering: the zero position of the sintering piston in mm.
• LASER/OPTIC
• Defocus: defocusing value in mm,
• Laser power: current Laser power, in %.
To Next Page
Loading...
Need help?
General
