3DHISTECH Pannoramic 250 - Page 109

Pannoramic 250 1.15 User’s Guide 4 Software Description
2. Select the Scan to CaseCenter option in the Scan Option window, then click Connect.
Figure 71 – Scan to CaseCenter option
3. Type in or select the server address from the Connect to: drop-down menu, and give the
User name and password. Activate the Secure connection option to enable HTTPS
connection. Click Connect when finished.
Figure 72 – Server Log in window
4. Click the Connect button in the Scan Options window to connect to the server. If the
connection is established the server status will be modified from Not connected to
Connected. Click OK to close the Scan Options window.
March 13, 2012 – Rev. 1 3DHISTECH Ltd.
109(135)