Application Interfaces
222
Note
You can also install the TAPI driver under Windows 7 and under Windows
Server 2008 R2 (x64). For Windows Server 2008 R2 (x64) an additional runtime library
is required. Download and install the “Microsoft Visual C++ 2008 SP1 Redistributable
Package (x64)” from the Microsoft web site under the following URL:
http://www.microsoft.com/downloads/details.aspx?FamilyID=ba9257ca-337f-4b40-
8c14-157cfdffee4e
Installing the TAPI Driver
1. Call up the start mask from the product CD (see Configuring the PC Software on
page 216).
2. Select Software: Install TAPI Service Provider from the start mask.
3. Follow the programme instructions.
Configuring the TAPI Connection
Note
Under Windows you should log on as the user for whom you want to configure the
TAPI connection.
1. In the Start menu, select Settings: Control Panel. Select the Printers and other
Hardware (with Vista/Windows 7: Hardware and Sound) category. Double-click
on the Phone and Modem Options icon.
2. Change to the Advanced tab.
3. From the list of installed driver software, select Aastra 800/OCX/OpenCom
Service Provider and click on Configure.
4. In the following dialogue you will find a list with the configured connections for
the user who is currently logged on. Click on New.
5. In the following dialogue you provide information for the new connection. In the
Connection name box you can enter a descriptive name for the connection. In the
CTI server box you must enter the DNS name or the IP address of the
OpenCom 100. Using the […] button you can search for this in the LAN. In the
boxes Username and Password you enter the user data of one of the users con-
To Next Page
Loading...
Need help?
General
