Application Interfaces
223
figured on the OpenCom 100. This user must be allocated a system terminal.
Confirm your entry with OK.
6. The new connection is now configured. Close the opened dialogues with OK and
Close.
Testing the TAPI Function
1. In the Start menu, select Programs: Accessories: Communication and then start
the programme called Phone Dialer.
Under Windows XP and Vista, the Phone Dialer is started indirect by using the
dialling function of the Address book (can be found in the start menu under Pro-
grams: Accessories). A manual start of the programme file “Dialer.exe” in the
“C:\Program Files\Windows NT” (XP) or “C:\WIndows\System32” (Vista) folder is
possible also.
2. In the Tools menu, select the item Connect using... to select the system terminal
that is to use the CTI application. Under Windows XP you select the item Options
from the Edit menu. In the Lines tab you then select the system terminal from the
Phone calls list.
3. Enter a telephone number in the Number box and confirm with Dial. Under
Windows XP you first click on the Dial icon and in the subsequent dialogue
activate Phone call.
4. The number you entered is displayed on the selected system terminal. Lift the
receiver to start dialling.
Note
This note is not relevant to Windows XP or Vista. If the “Phone Dialer” programme is
not installed, you will have to install it. To do this, you open the Control Panel
and click on Software. In the Windows Setup tab you activate the Connections
component.
To Next Page
Loading...
Need help?
General
