ABB ACS880-104

612 Fieldbus control through the embedded fieldbus interface (EFB)
PROCESS PID FEEDBACK AND SETPOINT
40.08 Set 1 feedback
1 source
Feedback data
storage
Connect the bits of the storage parameter
(10.99 RO/DIO control word) to the digital
input/outputs of the drive.
40.16 Set 1 setpoint 1
source
Setpoint data storage
SYSTEM CONTROL INPUTS
96.07 Parameter save
manually
Save (reverts to
Done)
Saves parameter value changes (including
those made through fieldbus control) to
permanent memory.
Parameter
Setting for
fieldbus control
Function/Information