ABB FOX615 - Packing of the Subrack and Accessories

To Next Page

To Previous Page

INSTALLATION PROCEDURES

36 FOX615Installation

− Number of the slot and position of the cable with respect to the slot is

documented for all units. Normally the slot number and the number

printed on the cable tray correspond.

− Units are not yet inserted.

• Instructions for installation

− Adhere to the general instructions as provided in the previous para-

graphs.

− Instructions for the installation of units (user guides) are available.

It is good installation practice to follow the steps for the installation of the

FOX in the order shown in the paragraphs below.

3.1.2 Packing of the subrack and accessories

The FOX615 equipment is packed in separate packages as follows:

• Subrack assembly and power cable

• FAMO1 fan unit, power/alarm cable and cable clips

• Optional items in separate packages:

− FAMO1 fan unit, power/alarm cable and cable clips

− FAMO1-F alarm unit, power/alarm cable and cable clips

− DUPF1 and additional power cable

− Heat deflection shield R7AI

− ETSI adapters

•Units

Depending on order/delivery the above packages are packed in covering

packages.