ABB FOX615 - Options and Adapters Checklist; Cables Checklist

CHECKLISTS
86 FOX615Installation
4.3 Options
4.4 Cables
4.4.1 Cables for alarm interfaces
There are no prefabricated cables available for the FAMO1 and FAMO1-F
alarm interfaces. Connector sets are available to allow on-site manufacturing
of cables and connections.
Table 10: Checklist FOX equipment
Description Identification Quantity (per subrack)
Units Remark
FAMO1 package: Separately packed
- FAMO1 unit FAMO1 1
- Power and alarm cable
for FAMO1
1 Cable packed with FAMO1
FAMO1-F package: Separately packed
- FAMO1-F unit FAMO1-F 1
- Power and alarm cable
for FAMO1-F
1 Cable packed with
FAMO1-F
Heat deflection shield R7AI 1 Normally 1 per subrack
DUPF1 DUPF1 1 DUPF1 contains the alarm
cable
Table 11: Checklist ETSI adapter options
Description Identification Quantity (per subrack)
Units Remark
ETSI adapters:
- Set 2 HU adapters for
ETSI installation
1 Required for later installa-
tion of the heat deflection
shield R7AI
- Set 9 HU adapters for
ETSI installation
1 Subrack + cable tray +
FAMO1 or FAMO1-F
- Set 11 HU adapters for
ETSI installation
1 Subrack + cable tray +
FAMO1 or FAMO1-F +
heat deflection shield R7AI