ABB FOX615 - Unit and cable management; Inserting units in the subrack

INSTALLATION PROCEDURES
76 FOX615Installation
3.9.3 Units and signal cables
3.9.3.1 Inserting units in the subrack
Normally the FOX615 subrack is delivered without units. The units are sepa-
rately shipped. For commissioning or replacement you must insert units into
the FOX subrack. Carefully read the instructions below before you insert
units into the subrack.
NOTICE
Electrostatic discharges. Risk of equipment damage!
Units are sensitive to electrostatic discharges!
→ Use a grounded protective wristband when handling units!
→ Keep the units in their ESD protective plastic bags until you use the
units!