IEC15000268 V3 EN-US
Figure 25: PCM600: Selecting an IED from the template library
3. Select the IED from the list of available IEDs.
4. Click the icon in the right column of the list of available templates to open the
Template Properties. Verify the template information, see
Figure 26 and click
Close to close the window.
IEC09000718 V2 EN-US
Figure 26: PCM600: IED Template Properties
5. Click Delete Template to delete the template, click Import Template to import a
template from the selection window or click Create to insert the selected IED
to the bay, see Figure 25.
1MRK 511 398-UEN C Section 4
Setting up a project
670 series 2.2 IEC 55
Engineering manual
To Next Page
Loading...
