It is possible to insert more than one IED from the Create New
Object from Template window and the selection window
remains open until the user clicks Close.
Importing a pre-configuration to template library
Pre-configurations in PCM600 are available as *.pcmt files and include all
information that is related to the IED object in PCM600. A given pre-configuration
is bound to a specific hardware configuration.
Options to insert pre-configuration files:
• Use the pre-configuration that has been shipped together with the IED.
• Install the pre-configuration from the Connpack media.
• Download and install pre-configuration from Update Manager.
To insert a pre-configuration in to plant structure, see section
Inserting an IED from
the template library.
Because IEC 61850 edition 1 and IEC 61850 edition 2 templates
are incompatible, convert an IEC 61850 edition 1 template to IEC
61850 edition 2 before you insert it.
Ordered pre-configurations are not locked. The user can use any of
the available pre-configurations for a particular product type as a
base to create an own configuration. The only requirement is that
all needed hardware and software options are available.
It is possible to give the inserted IED in the plant structure a user-
defined name. Be sure to only user characters a-z, A-Z, 0-9 and _.
Do not use space character in IED names.
Importing configuration to a template library
Template configurations in PCM600 are available as *.pcmt files and include all
information that is related to the IED object in PCM600.
Options to insert template configuration files:
• Install the template configuration from the Connpack media.
• Download and install the template configuration from Update Manager.
To insert the template configuration in to a plant structure, see section Inserting an
IED from the template library.
Section 4 1MRK 511 398-UEN C
Setting up a project
56 670 series 2.2 IEC
Engineering manual
To Next Page
Loading...
