7351 Series Digital Multimeter Operation Manual
6.7.5 Status Register Structure
6-43
Figure 6-5 Status Register Structure (2/2)
2. Event enable register
Each event register has an enable register that determines which bit is to be enabled. The enable reg-
ister sets the corresponding bit in decimal.
• Service Request Enable Register (SRER) setting: *SRE
• Standard Event Status Enable Register (SESER) setting: *ESE
• Measurement Event Enable Register (MEER): MSE
• Questionable Event Enable Register (QEER): QSE
• Operation Event Enable Register (OEER) OSE
To Next Page
Loading...
