ADCMT 7351A User Manual

7351 Series Digital Multimeter Operation Manual
5.9.2 Smoothing Calculation
5-21
4. Canceling the smoothing calculation
The smoothing calculation is canceled when any of the following conditions occur.
• The key is pressed while the smoothing calculation is performed.
• The measurement function is changed.
• The *RST command is executed.
5. Smoothing calculation and overload (OL)
If the overload occurs during the smoothing process, this measurement value is ignored.
(All measurement data except for OL data can be used in the smoothing calculation.)
SM

ADCMT 7351A Specifications

General

Brand	ADCMT
Model	7351A
Category	Multimeter
Language	English