ADCMT 7351A - Page 84

7351 Series Digital Multimeter Operation Manual
5.12.4 Front Panel Disabling Function
5-38
Panel lock setting
Set the panel lock according to the following procedure.
Operation
Character
display
section
1.
Press and select by using and .
MENU
SYS
2.
Press .
SYS
BEEP
3.
Select ‘P.Lock’ by using and .
SYS
P.L oc k
4.
Press .
P.L oc k
OFF
5.
Select ON by using and . and press .
P.L oc k
ON
6.
Select the digit in the numerical value entry section by using
and .
Change the numerical value by using and to enter the
password.
PWD
7.
Press .
If a correct password is entered, LOCK is displayed and exit
from MENU.
If an incorrect password is entered, the procedure returns to step
3.
Re-set by using the correct password.
PWD
LOCK
MENU
9 SYS
ENTER
ENTER