AEQ FORUM - Page 49

AEQ FORUM
Digital audio mixer for broadcast applications
49
Once the “Forum Setup” application is installed (by default, in C:\Program files \ForumSetup),
you can start it up by double-clicking the icon displayed on the desktop:
The configuration program will also be accesible from the Start menu.
When the application starts up, the access screen will appear asking user to introduce name
and password.
Only the users defined as administrators (“Administrator” access level) can access to this
application. User and password supplied by default are:
Login: ADMIN
Password: 1234
You may modify these parameters later in the “Administration” → “User Configuration” menu of
the application. Please refer to section 4.1.2 of this manual.
After entering the correct user-name and password, the program shows the main-screen where
you can access the different options.
There are two main areas in this workspace:
• Left side of the screen: pull-down menus and submenus area.
• Right side of the screen: larger area containing parameter settings for each of the
menus and submenus.