To Next Page

To Previous Page

AEQ FORUM

Digital audio mixer for broadcast applications

There are two distinct areas in this submenu:

• “Offline Operations”: allows you to execute actions where it is not necessary that the

Forum Setup application is in direct communication with the AEQ FORUM mixer. There

actions are available:

o “Import”: allows you to load in the application complete conifigurations

previously stored in a source file. By clicking the “Import” button, a standard

Windows “browse for file” window will open to locate the file to import. The files

must be of the proprietary type FSC (Forum Setup Configuration). These files

are encrypted for reasons of security.

You can find the “DemoConfiguration.FSC” file in C:\Program files

\ForumSetup\Demos.

IMPORTANT NOTE: when you load a configuration using this option, the active

configuration at that moment in the application is overwrited and get lost (unless

you previously save it by means of “Export” option). Therefore, you will be

asked for confirmation:

o “Export”: allows you to download the complete configuration, as shown in the

application at any given moment, to a target file. Clicking on the “Export” button

a standard Windows “save as” window will open allowing you to choose the

folder and output file name to be stored. These files will have the FSC

extension.

• “Online Operations”: allows you to execute actions where it is necessary that the

Forum Setup application is in direct communication with the AEQ FORUM mixer, which

“LAN” port, located on the rear panel of the mixer, has the default IP address displayed

on the screen. When the connection is made through the “ETHERNET” port, the default

IP address is 172.26.34.1.

The “Connect” button initiates the communication process between the Forum Setup

application and the AEQ FORUM Mixer. If the connection is established correctly the 3

associated buttons become active and the “Connect” button changes to “Disconnect”

(and allows you to end that communication).

The associated buttons functions are the following ones:

o “Read”: allows you to read the configuration currently active in the AEQ

FORUM mixer and download it in the Forum Setup application.

IMPORTANT NOTE: the active configuration at that moment in the application

is overwrited and get lost (unless you previously save it by means of “Export”

option).

AEQ FORUM User Manual

Other manuals for AEQ FORUM