Agilent Technologies 35670A Quick Start Guide

To activate the input channels
1
Press [
Inst Mode
].
2 Press [
CHANNELS 1 2
] to highlight
1
for a one channel measurement.
This selection must be made before the measurement is started. If you change the
number of input channels, you must restart the measurement. At preset, the analyzer is
set to measure with two channels.
Channel 1 is the reference channel for measurement results that require data for
two channels.
Overload Indicator
Channel 2
Half Range Indicator
Channel 1
The Basics Agilent 35670A Quick Start Guide
6

Agilent Technologies 35670A Specifications

General

Brand	Agilent Technologies
Model	35670A
Category	Measuring Instruments
Language	English