Agilent Technologies 35670A Quick Start Guide

To save a trace to a data register
1
Activate the trace if the one you want to save is not currently active. See “To select
theactivetrace.”
2 Press [
Save/Recall
] [
SAVE DATA
][
SAVE TRACE
][
INTO D1
].
Data registers are cleared each time you turn off the analyzer. The analyzer uses the
data registers to store the contents of certain operations.
• D6—is a default data register for the curve fit operation.
• D7—is a default data register for the curve fit operation.
• D8—is the default data register for the synthesis operation.
To recall a trace from a data register, see steps 4 and 5 of “To recall a trace from a
file.”
Agilent 35670A Quick Start Guide Saving and Plotting Data
51

Agilent Technologies 35670A Specifications

General

Brand	Agilent Technologies
Model	35670A
Category	Measuring Instruments
Language	English