To set the analyzer’sclock
1
Press [
System Utility
] [
CLOCK SETUP
].
2 Press [
TIME HHMM
] <time> [
ENTER
].
3 Press [
DATE MMDDYY
]<date>[
ENTER
].
You can set the analyzer’s battery-backed clock to match the current time and date.
After you set the clock, it maintains the time and date—even when the analyzer is
turned off.
Enter <time> and <date> using the numeric keypad. Use a 24-hour format for <time>
and a month-day-year format for <date>.
The time stamp determines how the analyzer displays the date and time. To change
the format of the time stamp, press [
System Utility
] [
CLOCK SETUP
]
[
TIME STAMP SETUP
]. The analyzer provides several formats. See online help for
more information.
Time and date are
included in top-left
corner when you plot
or print with [TIME
STMP ON] in
[Plot/Print] [MORE
SETUP] menus
Agilent 35670A Quick Start Guide Setting Up
15
To Next Page
Loading...
