To save an Instrument BASIC program to disk
1
Select the active Instrument BASIC program.
2 Select the default disk.
3 Press [
Save/Recall
] [
SAVE MORE
].
Press [
SAVE PROGRAM
].
4 Type a file name, then press [
ENTER
].
5 If the program had been saved before, press [
OVERWRITE FILE
].
After you have entered a file name the analyzer saves the active program to a file on
the default disk. If the file name ends with a number (for example, PROG1), the
analyzer automatically increments the default file name during successive save
operations. For more information on typing a file name and selecting the default disk,
see “To type a text string” and “To select the default disk” earlier in this book.
Determines if program is saved as an ASCII
file or binary file
To save a program, press [SAVE PROGRAM]
If program already exists,
press [OVERWRITE FILE]
Automating Measurements Agilent 35670A Quick Start Guide
60
To Next Page
Loading...
Need help?
General
