Agilent Technologies 35670A Quick Start Guide

To activate the input channels—Option AY6
1
Press [
Inst Mode
].
2 Press [
CHANNELS 1 2 4
] to highlight
4
for a four channel measurement. Press it again to
highlight
1
for a single channel measurement.
3 If you want to make Channel 3 the reference channel to Channel 4, press [
REF CHANS 1
1,3
] to highlight
1,3
.
This selection must be made before the measurement is started. If you change the
number of input channels, you must restart the measurement. At preset, the analyzer is
set to measure with two channels.
Channel 1 is the default reference channel. If you want to use channel pairs, set
Channel 3 as the reference to Channel 4. Channel 1 remains the reference to
Channel 2.
Option AY6
Half Range Indicator
Overload Indicator
Agilent 35670A Quick Start Guide The Basics
7

Agilent Technologies 35670A Specifications

General

Brand	Agilent Technologies
Model	35670A
Category	Measuring Instruments
Language	English