Agilent Technologies 35670A Quick Start Guide

Tosaveatracetoafile
1
Activate the trace if the one you want to save is not currently active. See
“To select the active trace” in the Working with the Display section.
2 Press [
Save/Recall
] [
SAVE DATA
][
SAVE TRACE
][
INTO FILE
].
3 Type a file name, then press [
ENTER
].
or
Use the default name.
After you have entered a file name the analyzer saves the active trace to a file on the
default disk. The analyzer automatically increments the default file name during
successive save operations. For more information on typing a file name and selecting
the default disk, see “Totypeatextstring” and “To select the default disk” earlier in
this book.
Tosaveatracetoadataregister,repeatstep2exceptpressoneofthedataregister
softkeys, rather than the [
INTO FILE
] softkey.
Agilent 35670A Quick Start Guide Saving and Plotting Data
49

Agilent Technologies 35670A Specifications

General

Brand	Agilent Technologies
Model	35670A
Category	Measuring Instruments
Language	English