Agilent 35670A Verifying Specifications
3-51
ITM_35670A Main Menu Descriptions
If you do not have a keyboard connected
to the analyzer, use the numeric key pad
and the alpha keys to enter names or
numbers. See the analyzer’s help text
for a description of the alpha keys.
Load and run the ITM_35670A program
to display the following softkeys:
[
START TESTING ]
Displays a menu that allows you to start
testing with any test or to select just one
test in the list. Before pressing this
softkey, use [
TEST CONFIG ] and
[
EQUIP CONFIG ].
[ TEST CONFIG ]
Displays the test configuration and a
menu that allows you to enter the
procedure, stop conditions, beeper
prompt, and GPIB address for the
analyzer and printer.
[
EQUIP CONFIG ]
Displays the test equipment
configuration and a menu that allows
you to enter the model number,
calibration due date, serial number, and
GPIB address for each test instrument.
[
TITLE PAGE ]
Displays the test record title page
information and a menu that allows you
to enter information for the analyzer.
[
STOP ITM ]
Stops the ITM_35670A program.
To Next Page
Loading...
