Verifying Specifications Agilent 35670A
3-52
Start Testing Menu Descriptions
Press [ START TESTING ] to display the
following softkeys:
[
START BEGINNING ]
Prints the test record title page
information and starts the selected test
procedure at the beginning. When you
select [
START BEGINNING ], the data
is written to a file on the disk and
printed only after all tests are done.
[
START MIDDLE ]
Displays a list of all the tests in the
selected procedure. Testing starts with
the test you select and continues through
the remainder of the tests in the list.
When you select [
START MIDDLE ],
the data is printed immediately after
each measurement.
[
ONE TEST ]
Displays all the tests in the selected
procedure. The test you select is the
only test performed. When you select [
ONE TEST ], the data is printed
immediately after each measurement.
[
RETURN ]
Returns to the ITM_35670A main
menu.
Start a test to display the following
softkeys:
[
STOP TESTING ]
Stops the test and returns to the
ITM_35670A main menu.
[
RESTART TEST ]
Starts the current test over. Any
connection prompts are repeated.
[
RESTART MEAS ]
Starts the current measurement over.
The following softkeys also appear
when the program is waiting for you to
press [
CONTINUE ]:
[
STOP BEEPING ]
Turns off the beeper prompt for the
remainder of this measurement.
[
CONTINUE ]
Continues the test. Press this key after
following the directions on the display.
To Next Page
Loading...
Need help?
General
