Maintaining Your GC 5
To Replace the Fused Silica Needle in a Syringe for the COC Inlet 118
To Bakeout Contaminants from the COC Inlet 119
8 Maintaining the MMI
Consumables and Parts for the Multimode Inlet 122
Exploded Parts View of the MMI 124
To Install the Column Nut Adapter 125
To Install a Capillary Column with the Multimode Inlet 126
To Change the Septum on the MMI 130
To Clean the Septum Seat in the Insert Assembly of the MMI 132
To Change the Liner and O-Ring on the MMI 134
To Replace the Filter in the Split Vent Trap for the MMI 137
To Clean the Multimode Inlet 139
To Bakeout Contaminants from the MMI 141
9 Maintaining the PTV Inlet
Consumables and Parts for the Programmable Temperature Vaporization Inlet 144
Exploded Parts View of the PTV Inlet 146
To Install a Capillary Column with the Programmable Temperature Vaporization
Inlet 147
To Clean the Septumless Head on the PTV Inlet 150
To Replace the Septumless Head PTFE Ferrule on the PTV Inlet 152
To Change the Septum on the PTV Inlet 154
To Clean the Septum Seat in the Septum Head Assembly of the PTV Inlet 155
To Change the Liner on the PTV Inlet 156
To Replace the Inlet Adapter for the PTV Inlet 158
To Replace the Filter in the Split Vent Trap for the PTV Inlet 160
To Bakeout Contaminants from the PTV Inlet 162
10 Maintaining the VI
Consumables and Parts for the Volatiles Interface 164
Exploded Parts View of the VI 166
To Install a Capillary Column with the Volatiles Interface 167
To Remove the VI Interface 171
To Next Page
Loading...
Need help?
General
