6 Maintaining Your GC
To Clean the VI 173
To Install the VI Interface 174
To Replace the Filter in the Split Vent Trap for the VI 175
To Bakeout Contaminants from the VI Inlet 177
11 Maintaining the FID
Consumables and Parts for the FID 180
Exploded Parts Views of the Flame Ionization Detector 182
To Install a Capillary Column in the FID 184
To Replace an FID Jet 187
To Perform Maintenance on the FID Collector Assembly 190
To Check the FID Leakage Current 197
To Check the FID Baseline 198
To Install the Optional FID PTFE Chimney Insert 199
To Bakeout the FID 200
12 Maintaining the TCD
Consumables and Parts for the Thermal Conductivity Detector 202
To Install a Capillary Column in the TCD 204
To Bakeout Contaminants from the TCD 207
13 Maintaining the NPD
Consumables and Parts for the NPD 210
Exploded Parts View of the Nitrogen-Phosphorus Detector 212
To Install a Capillary Column in the NPD 213
To Replace the NPD Bead Assembly 216
To Maintain the NPD Collector, Ceramic Insulators, and Jet 220
To Check the NPD Leakage Current 225
To Bakeout the NPD 226
14 Maintaining the ECD
Important Safety Information About the ECD 228
Consumables and Parts for the ECD 230
Exploded Parts View of the Electron Capture Detector 232
To Next Page
Loading...
Need help?
General
