9Errors
Error List
130 Agilent 990 Micro GC User Manual
18 INFO Injector temperature is restored, chan = <n>
19 RECOVERABLE Column temperature fault, chan = <n>
20 CRITICAL Column heater sensor fault, chan = <n>
21 CRITICAL Column heater is open, chan = <n>
22 CRITICAL Column heater is short, chan = <n>
23 RECOVERABLE Column heating too slow, chan = <n>
24 INFO Column temperature is restored, chan = <n>
25 RECOVERABLE Aux zone temperature fault, chan = <n>
26 CRITICAL Aux zone heater sensor fault, chan = <n>
27 CRITICAL Aux zone heater is open, chan = <n>
28 CRITICAL Aux zone heater is short, chan = <n>
29 WARNING Aux zone heating too slow, chan = <n>
30 INFO Aux zone temperature is restored, chan = <n>
31 RECOVERABLE Inlet <n> temperature fault
32 CRITICAL Inlet <n> sensor fault
33 CRITICAL Inlet <n> is open
34 CRITICAL Inlet <n> is short
35 RECOVERABLE Inlet <n> heating too slow
36 INFO Inlet <n> temperature is restored
37 RECOVERABLE Spare heater 1 temperature fault
38 CRITICAL Spare heater 1 sensor fault
39 CRITICAL Spare heater 1 is open
40 CRITICAL Spare heater 1 is short
41 RECOVERABLE Spare heater 1 heating too slow
42 INFO Spare heater 1 temperature is restored
43 RECOVERABLE Spare heater 2 temperature fault
44 CRITICAL Spare heater 2 sensor fault
45 CRITICAL Spare heater 2 is open
46 CRITICAL Spare heater 2 is short
47 RECOVERABLE Spare heater 2 heating too slow
48 INFO Spare heater 2 temperature is restored
49 INFO Self-testing cycle start
50 INFO Self-testing cycle end
51 RECOVERABLE License lost due to key detached
52 INFO License restored
53 INFO Wait for preconditions of flush cycle
54 INFO Start one flush cycle
Table 31 Error list (continued)
Error code Class Error messages