Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide 23
Installation and Start Up 2
Installing your UV-Visible Spectrophotometer
Installing your UV-Visible Spectrophotometer
Your spectrophotometer is very easy to install. This section provides an
overview of the instrument and a checklist of the main installation
procedure. If you have accessories for the spectrophotometer which are
not covered in this section, see Chapter 4, “Installing Accessories” or refer
to the documentation that was delivered with your accessories for detailed
information.
Instrument overview
The front view of the spectrophotometer is shown in Figure 1 which
shows the sample compartment open. Unlike conventional instruments the
UV-Visible spectrophotometer does not suffer from ambient stray light. The
open sample area makes it easier to access it generally and to connect
tubing to a flow cell or thermostattable cell holder. The spectrophotometer
is shipped with the standard single- cell cell holder already in place.
Standard and accessory cell holders can be removed and replaced in
seconds with few or no tools.
To Next Page
Loading...
Need help?
General
