Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide 125
LAN Communication, Installation, Connection and Configuration 7
Using the Agilent BootP Service
Configure the Agilent BootP Service
BootP Service starts automatically when your PC reboots. In order to add
an additional instrument or to change the configuration the service must
be stopped. After the changes have been applied, the service must be
restarted.
1 To stop the BootP service go to Start > Settings >Control Panel >
System and Security and select Administrative Tools > Services. The
Services window appears.
2 Right click Agilent BootP Service.
3 Select Stop.
4 Close the Services and Administrative Tools windows.
Figure 61 Services window
To Next Page
Loading...
Need help?
General
