17
Agilent Cary 8454 UV-Visible Spectroscopy System
Installation Guide
Agilent Technologies
2
Installation and Start Up
Site Requirements for Your Spectrophotometer 19
Unpacking Your Spectrophotometer 22
Installing your UV-Visible Spectrophotometer 23
Installing Your Computer 29
Starting the Spectrophotometer 31
Starting the Agilent ChemStation Software 34
Operational Checkout 34
The following topics are covered in this section:
• “Site Requirements for Your Spectrophotometer” on page 19 contains
information about electrical requirements such as power lines, power
cords, etc. It also gives recommendation for minimum available bench
space and environmental conditions in the laboratory.
• “Unpacking Your Spectrophotometer” on page 22 contains information
about what to do when the packing material is damaged or the
shipment is incomplete. It includes a list of the items which are
supplied with the instrument and computer.
• “Installing your UV-Visible Spectrophotometer” on page 23 gives an
overview of the instrument and explains buttons, indicators and the
line power switch. It explains where and how to connect line power,
communications and waste drain tubing.
• “Installing Your Computer” on page 29 describes how to install the
computer and peripherals, e.g. monitor, mouse, keyboard and printer.
Because the UV-Visible operating software comes already installed when
the system has been ordered as a bundle, this topic is covered in
Chapter 6, “GPIB Communication, Connections and Configuration”.
To Next Page
Loading...
Need help?
General
