74 Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide
5 Installing the UV-Visible Software
Installing the Agilent ChemStation Using the DVD
8 The configuration editor will open automatically as part of setup. Adjust
the configuration if desired - the default is for GPIB communication
from the PC to the spectrophotometer. Save the configuration and exit
the configuration editor. Setup will then continue.
9 Click Finish to complete the setup and reboot your system.
Monitor Configuration
If you have a monitor with a 800×600 pixel resolution, use small fonts,
whereas for a monitor with a 1024×768 or higher resolution, you may
select a larger font. The font size is available with the control panels’s
Display settings. In the Display properties dialog box use the Appearance
tab for the adjustment.
If you selected the G3770AA or G5182AA ECM access module, establish your ECM access
using Internet Explorer before you first launch UV-Visible ChemStation.
To Next Page
Loading...
