Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide 15
Fast Installation 1
Installing Software Only
Installing Software Only
✔ Unpack the software—check for damage and check the contents against
the packing list.
✔ Ensure that your computer and printer meet the requirements for
proper operation of the software.
For more information, see “Minimum PC Requirements for
Agilent ChemStation” on page 66.
✔ Switch on the spectrophotometer (make sure the sample area is clear)
and wait two minutes for the lamps to ignite. When you are ready to
operate your spectrophotometer switch on the computer and printer.
✔ From the Windows menu install the Agilent ChemStation software.
For more information, see “Installing the Agilent ChemStation Using the
DVD” on page 69.
✔ From the Windows Start menu start the Agilent ChemStation software.
For more information, see “Starting the Agilent ChemStation
Software” on page 34.
✔ Ensure that your software and spectrophotometer operate properly, by
taking a blank measurement or by performing the automatic self- test in
the diagnostic section of your software.
For more information, see “Operational Checkout” on page 34.
To Next Page
Loading...
Need help?
General
