88 Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide
6 GPIB Communication, Connections and Configuration
Configuring the Agilent 82350 GPIB Interface
Configuring the Agilent 82350 GPIB Interface
• To configure your 82350 GPIB Interface, the Agilent IO Libraries Suite
must be installed. See “Installation of the Agilent GPIB Communication
Library” on page 84 for details.
• The 82350 PCI GPIB interface must be installed in your PC. See
“Installing an GPIB Interface” on page 81 for hints.
1 Boot your PC, a tool tip will notify you about new hardware and the
Found New Hardware Wizard will start. Select Option 2 and click Next
If the Found New Hardware Wizard appears and the Agilent IO Libraries Suite is not
installed, press the Cancel button.
Local administrator rights are required to configure your interface.
To Next Page
Loading...
