Agilent Cary 8454 UV-Visible Spectroscopy System Installation Guide 97
GPIB Communication, Connections and Configuration 6
Configuring the Agilent 82357 USB - GPIB Interface
6 Click Finish to close the wizard after the initialization Hardware driver
(see Figure 43). The initialization of the USB device is finished, the
installation still needs to be done.
7 The hardware wizard now detects the USB- GPIB device for a second
time and the Found New Hardware Wizard starts again (see Figure 44).
8 Select Option 1 and click Next (see Figure 44).
Figure 43 Finish Device Driver Installation
Figure 44 Found New Hardware Wizard, second detection
To Next Page
Loading...
Need help?
General
