Agilent Technologies G8610A User Manual

Agilent Technologies Helium Leak Detector
DRAFT 12/11/17
151
TUNE Adjusts the ion source voltage to cause a maximum response to helium.
VENT Causes the leak detector to isolate and vent the test port to the atmosphere.
XYZZY Unlocks the system so that all RS-232 commands are accessible.
ZERO Sets the current leak rate measurement to be 0.0 atm cc/sec in the most
sensitive range.
Table A-4 Leak Detection Actions (Continued)
Command Action

Agilent Technologies G8610A Specifications

General

Brand	Agilent Technologies
Model	G8610A
Category	Measuring Instruments
Language	English