Save/Recall (Setups, Screens, Data) 17
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide 277
Performing a Secure Erase
1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press Default/Erase.
3 In the Default menu, press Secure Erase.
This performs a secure erase of all non- volatile memory in compliance
with National Industrial Security Program Operation Manual (NISPOM)
Chapter 8 requirements.
You must confirm the secure erase, and the oscilloscope will reboot
when finished.
To Next Page
Loading...
