301
Agilent InfiniiVision 3000 X-Series Oscilloscopes
User's Guide
s1
20
Web Interface
Accessing the Web Interface 302
Browser Web Control 303
Save/Recall 307
Get Image 309
Identification Function 310
Instrument Utilities 311
Setting a Password 312
When the Agilent InfiniiVision X- Series oscilloscopes have the DSOXLAN
LAN/VGA option module installed, you can access the oscilloscope's
built- in web server using a Java- enabled web browser. The oscilloscope's
web interface lets you:
• View information about the oscilloscope like its model number, serial
number, host name, IP address, and VISA (address) connect string.
• Control the oscilloscope using the Remote Front Panel.
• Send SCPI (Standard Commands for Programmable Instrumentation)
remote programming commands via the SCPI Commands applet window.
• Save setups, screen images, waveform data, and mask files.
• Recall setup files, reference waveform data files, or mask files.
• Get screen images and save or print them from the browser.
• Activate the Identification function to identify a particular instrument
by causing a message to be displayed or a front panel light to blink.
• View installed options, view firmware versions and install firmware
upgrade files, and view calibration status (via the Instrument Utilities
page).
• View and modify the oscilloscope's network configuration.
To Next Page
Loading...
Need help?
General
